P-AU100

Aliphatic urethane

P-AU100 is a two-component abrasion, chemical and stain resistant, UV stable aliphatic polyester polyurethane finish coat. It is available in clear gloss, clear satin and can be pigmented. It is VOC Compliant in all states and provinces in North America. It cures to an inert, tough, impact, abrasionand chemical resistant finish coat. It is resistant to Skydrol, betadine and conventional hot-tire staining. Excellent adhesion to PurEpoxy’s epoxy system. It requires a primer, Polyurethane-Acrylic Primer and Concrete Sealer, when it is applied to properly prepared concrete and cementitious overlays. It is used as an upgraded finish coat on PurEpoxy products and systems used in aircraft hangars, industrial kitchens, automotive showrooms and shop floors, commercial laboratories and research facilities, hospital and health care, wine and spirit processing and other facilities subjected to heavy foot traffic, fork lift traffic and chemical attack.

Advantages

  • Long pot life
  • Respectable odor
  • Superior chemical resistance (compared to standard epoxy)
  • Excellent chemical resistance
  • Light stable and good gloss retention
  • VOC complaint

Where to use

  • UV-stable top coat
  • Aircraft hangar floors
  • Production areas
  • Maintenance facilities
  • Warehouses

Technical Data

IMPORTANT NOTE: PROPERTIES @ 73°F (23 °C) and 50% R.H. Times are approximate and will be affected by changing ambient conditions, especially changes in temperature and relative humidity. The indicated mileage is calculated for flat surfaces. A porous or imperfect surface will require more material in order to cover the same mileage. *

PACKAGING1 US gal (4 L)
COVERAGE RATE800 ft2/gallon
RECOMMENDED THICKNESS3.2 wet mils (81 microns)
MIX RATIO, BY VOLUMEA : B = 4 : 1 + 1lb Aluminum Oxide
DENSITY (KG/L)Part A: 1.14
Part B:0.90
Mixed: 1.09
POT LIFE60 minutes @ 77°F (25°C)
WORKING TIME30 minutes
VOC75.4 g/L

Documentation