PE-100 LVX Low viscosity – High gloss epoxy clear

PE-100 LVX Low viscosity – High gloss epoxy clear

PE-100 LVX is a solvent-less, two component epoxy coating system, low viscosity creating vibrant color and high gloss finish. It exhibits very good appearance and chemical and physical properties.

ADVANTAGES

  • Dense surface resistant to bacteria and moisture and easy to clean.
  • May apply several layers on itself with excellent adhesion.
  • Contains no solvent with a very low VOC content (VOC = 75.4 g/liters), allowing for interior application without harmful odors.
  • Excellent adhesive properties, allowing application on other firm and hard coating, as well as a good bond to the substrate.

TECHNICAL DATA

PACKAGING 3 US gal (11.35 L)
COLOR PART A: Clear PART B: Clear to amber
RECOMMENDED THICKNESS (SOLID COLOR) PRIMER (PE-100): 10 mils (150 ft²/gal)
FINISH COAT (PE-100): 16 mils (100 ft²/gal)
RECOMMENDED THICKNESS (FLAKES SYSTEM) PRIMER (PE-100): 10 mils (150 ft²/gal)
FINISH COAT (PE-100): 13 mils (120 ft²/gal)
RECOMMENDED THICKNESS (METALLIC SYSTEM) PRIMER (PE-100): 10 mils (150 ft²/gal)
FINISH COAT (PE-100): 40 mils (40 ft²/gal)
SHELF LIFE 12 months in original unopened factory sealed containers. Keep away from extreme cold, heat, or moisture. Keep out of direct sunlight and away from fire hazards.
MIX RATIO, BY VOLUME A:B = 2:1
MIX RATIO, BY WEIGHT Clear: A:B = 100:41-48
Colors: A:B = 100:39-45
With quartz sand : A:B = 100:50
Mixture = 200
POT LIFE 16 OZ (454 G) 40-50 minutes @ 77°F (25°C)
OPEN TIME ON SUBSTRATE 45-60 minutes
VOC (G/L) 75.4 g/L
IMPORTANT NOTE: PROPERTIES @ 73°F (23 °C) and 50% R.H. Times are approximate and will be affected by changing ambient conditions, especially changes in temperature and relative humidity. The indicated mileage is calculated for flat surfaces. A porous or imperfect surface will require more material in order to cover the same mileage.